Greenboy
Member
Offline
Location: San Diego, CA. USA
Posts: 102
|
|
« Reply #90 on: January 23, 2019, 07:35:07 PM » |
|
Thanks for the reply regardless of timing. I already glued in my inserts with Gorilla Gel Glue.
I really like your idea about the Corian Platters. I would want to also have something that was the same diameter as the Lenco Platter.
|
|
|
Logged
|
DO TIME WITH IT
|
|
|
Yurisequin
Member
Offline
Location: Berlin, Germany
Posts: 98
|
|
« Reply #91 on: January 28, 2019, 02:16:22 PM » |
|
You are welcome to my designs if you want them. I bought a Corian offcut for €20 and had them machined locally.
|
|
|
Logged
|
|
|
|
Greenboy
Member
Offline
Location: San Diego, CA. USA
Posts: 102
|
|
« Reply #92 on: January 29, 2019, 07:31:36 AM » |
|
you have the design on computer for a cnc? If so the answer is yes.
|
|
|
Logged
|
DO TIME WITH IT
|
|
|
ICLlP
Member
Offline
Age: 67
Location: Faringdon, Oxon, UK
Posts: 289
|
|
« Reply #93 on: February 02, 2019, 01:16:16 PM » |
|
Here's the power module I'm using: plug+fuse+switch. I'd appreciate any pointers anyone has on how to wire it up correctly How have you got on with having just this switch at the back of the TT? You're not wishing you had a switch on top front of the TT also?
|
|
|
Logged
|
Ifor
|
|
|
Yurisequin
Member
Offline
Location: Berlin, Germany
Posts: 98
|
|
« Reply #94 on: February 11, 2019, 12:09:04 PM » |
|
I have found the switch pretty comfortable with the turntable installed in a variety of heights and positions. YMMV of course.
|
|
|
Logged
|
|
|
|
Yurisequin
Member
Offline
Location: Berlin, Germany
Posts: 98
|
|
« Reply #95 on: February 11, 2019, 12:10:08 PM » |
|
@Greenboy, the designs are Adobe Illustrator and/or PDF. My CNC guy was happy to use them cheers, D. you have the design on computer for a cnc? If so the answer is yes.
|
|
|
Logged
|
|
|
|
Greenboy
Member
Offline
Location: San Diego, CA. USA
Posts: 102
|
|
« Reply #96 on: February 14, 2019, 01:21:23 AM » |
|
Can you PM them to me. I would like to use the file.
|
|
|
Logged
|
DO TIME WITH IT
|
|
|
giubeca
Member
Offline
Location: Italy
Posts: 37
|
|
« Reply #97 on: January 25, 2020, 12:31:49 AM » |
|
Hi Yurisequin, could you send drawings also to me? Thanks
|
|
|
Logged
|
Giulio
|
|
|
itskeith
Member
Member
Offline
Location: Nottingham
Posts: 4,892
|
|
« Reply #98 on: January 28, 2020, 05:45:29 PM » |
|
Looks superb
|
|
|
Logged
|
Keith
|
|
|
rfgumby
Administrator
Member
Offline
Location: Minneapolis, Minnesota, USA
Posts: 18,338
|
|
« Reply #99 on: January 29, 2020, 07:23:52 PM » |
|
FWIW, I've also directly tapped thick Corian with a HSS tap. Pre-drill hole size should be on the side of 80%+ threads (smaller pre-drill hole). Provided the Corian material is thick and the torque requirements of the part being fastened is low, it actually works quite well. Tonearm mount fasteners for example.
Of course, I've used the threaded inserts, in brass and steel. I use epoxy for seating these as well. My grumble is, how large to drill the pre-drill hole for the insert itself. You need enough Corian for the insert to bite into, but not so much that screwing or installing the insert causes the Corian to "blow out" material around the insert. Taps happen to manage that with a little less likeliness of blow out, and possibility of that breakage being seen around the item you're fastening.
Peter has a ton of experience here, he may be able to add more opinion. But thought I'd mention it.
|
|
|
Logged
|
Scott
Keep a clean nose, watch the plain clothes You don't need a weather man to know which way the wind blows -Bob Dylan
|
|
|
Yurisequin
Member
Offline
Location: Berlin, Germany
Posts: 98
|
|
« Reply #100 on: January 31, 2020, 10:52:38 AM » |
|
mine are essentially potted in epoxy. that is, the inserts don't bite into the Corian at all, they just barely touch.
|
|
|
Logged
|
|
|
|
|